Sewing Machine Tips & Guides

Keep your machine running smoothly with these practical tips from our team.

Regular Maintenance

A well-maintained sewing machine will last decades. Follow these habits to keep yours in top shape.

Clean After Every Project

Remove the needle plate and brush out lint from the bobbin area after each project. Lint build-up is the number one cause of skipped stitches and tension problems.

Oil on Schedule

Most mechanical machines need a drop of sewing machine oil on the hook race and other moving parts every 8–10 hours of use. Check your manual for the exact oiling points — over-oiling can stain fabric.

Change Your Needle Regularly

Replace the needle after every 8–10 hours of sewing, or whenever you start a new project. A dull or bent needle causes skipped stitches, fabric snags, and broken thread.

Use Quality Thread

Cheap thread sheds lint rapidly and can gum up the tension discs. Stick to name-brand polyester or cotton thread appropriate for your fabric weight.

Cover When Not in Use

Dust is the enemy of precision mechanisms. Keep your machine covered when not in use to protect the tension assembly and feed dogs.

Common Troubleshooting

Before calling a technician, try these fixes for the most frequent sewing machine problems.

Thread keeps breaking

Re-thread the machine completely from scratch — both upper thread and bobbin. Check that the presser foot is down when threading. Inspect the needle for burrs or bends and replace it if in doubt.

Skipped stitches

The needle is usually the culprit. Replace it with the correct type and size for your fabric. Also check that the needle is fully inserted and the flat side faces the back.

Tension problems / loops on fabric

Loops on the bottom mean upper tension is too loose; loops on top mean the bobbin tension is off. Re-thread both upper and lower paths carefully, making sure the thread seats in every guide and the tension discs.

Machine won't feed fabric

Check that the feed dogs are raised (not dropped for free-motion work). Clean lint from around the feed dogs. Confirm the stitch length is not set to zero.

Noisy or grinding sound

Stop immediately and check for a thread jam around the bobbin area. Clear any tangled thread, then oil the machine per your manual. If the noise persists after oiling and cleaning, have a technician inspect the timing.

General Sewing Advice

Match Needle to Fabric

Universal needles work for most wovens, but use ballpoint/stretch needles for knits, denim needles for heavy fabrics, and microtex needles for fine silks. The right needle prevents skipped stitches and fabric damage.

Test on Scrap First

Always sew a test seam on a scrap of your project fabric before starting. This lets you dial in tension, stitch length, and presser foot pressure without risking your good material.

Keep Your Manual Handy

Your machine's manual is the definitive guide to its specific threading path, tension settings, and maintenance schedule. If you've lost yours, we carry instruction and service manuals for hundreds of models.

Slow Down for Precision

Speed is the enemy of accuracy. Sew slowly around curves, corners, and when joining seams. Most machines have a speed control — use it.

Can't Find Your Manual?

The right manual makes maintenance and troubleshooting much easier. Browse our catalogue of over 1,794 instruction and service manuals.